Industrial Pumps & Flow Equipment
Centrifugal, Process, Slurry & Submersible Pumps
We supply pumps from 1 m³/h to 30,000 m³/h — standard water pumps, ISO and API process pumps, slurry, submersible and screw pumps, with the valves, agitators and mechanical seals that complete the installation.
Send us your duty point: flow, head, medium, temperature and NPSH available. We will select the pump, confirm the material and seal, and quote.
What we supply
Standard water & general service pumps
- KSB Etanorm / Etanorm MyFlow / Etanorm Pro (EN 733)
- KSB Multitec and Movitec multistage pumps
- Sulzer end-suction and axially split pumps (ISO / ANSI / EN)
- Sulzer ZPP double-suction pumps
Chemical & refinery process pumps
- KSB MegaCPK and CPKN (ISO 2858 dimensions, ISO 5199 design)
- KSB Magnochem magnetic drive pumps (sealless, optional API 685)
- Sulzer OHH / OHHL process pumps (API 610 / ISO 13709 OH2)
- Sulzer ZE / ZF radially split multistage pumps
- Sulzer MSD / MSD2 barrel pumps (BB3)
Slurry & abrasive duties
- Sulzer EMW heavy-duty slurry pumps (EMW-M / EMW-R)
- Sulzer AHLSTAR A / APT / NPP-T process pumps
Submersible & wastewater
- KSB Amarex KRT submersible pumps and lifting stations
- Sulzer ABS XFP submersible sewage pumps
- Sulzer submersible dewatering pumps
Desalination & high-pressure
- Sulzer MSN-RO / MSD-RO reverse osmosis high-pressure pumps
- Sulzer MBN multistage ring-section pumps
Valves, agitators & sealing
- KSB ISORIA butterfly valves (DN 40 – 1000, PN 10/16)
- KSB DANAÏS MT II butterfly valves (DN 50 – 1200, up to 260 °C, API 607 fire-safe)
- KSB gate, globe, check and SISTO diaphragm valves
- KSB and Sulzer agitators / mixers
- Sulzer mechanical seals
- Sulzer Chemtech tower internals and static mixers
Pump drives
- KSB PumpDrive 2 / 3 and SuPremE motors
- ABB ACQ580 drives for water and wastewater
Specification at a glance
Typical duty ranges — KSB
| Etanorm | Q ≤ 2,321 m³/h · H ≤ 160 m · PN 10/16 · −30 to +140 °C |
|---|---|
| MegaCPK | Q ≤ 2,700 m³/h · H ≤ 162 m · PN 25 · −40 to +400 °C · DN 25 – 200+ |
| Magnochem | Q ≤ 1,160 m³/h · H ≤ 236 m · PN 40 · −90 to +350 °C |
| Multitec | Q ≤ 1,500 m³/h · H ≤ 1,000 m · PN 100 · −10 to +200 °C |
| Amarex KRT | Q ≤ 10,080 m³/h · H ≤ 120 m · up to 850 kW · 240 mm free passage |
Typical duty ranges — Sulzer
| OHH (API 610 OH2) | Q ≤ 2,250 m³/h · H ≤ 360 m · up to 75 bar · −75 to +425 °C |
|---|---|
| MSD / MSD2 (BB3) | Q ≤ 3,200 m³/h · H ≤ 2,900 m · up to 300 bar |
| ZPP double-suction | Q ≤ 30,000 m³/h · H ≤ 160 m |
| ABS XFP | Q ≤ 8,780 m³/h · H ≤ 110 m · 1.3 – 600 kW · IE3 / ATEX |
| EMW slurry | Q ≤ 6,500 m³/h · H ≤ 95 m · bearing L10 > 50,000 h |
| Scaba agitators | Power ≤ 400 kW · shaft length up to 30 m |
Where it is used
Other Brands Available on Request
Beyond the brands shown here, we also source and supply spare units and parts for most international and Chinese industrial brands. Not sure what you have? Send us a photo of the nameplate — we will identify the unit and quote the original part.
Why work with us
- We select against your full duty point — flow, head, NPSH, medium, temperature and solids content.
- Material and seal selection is confirmed before quotation, so a pump is not lost to the wrong elastomer.
- Pump, motor, drive and valves supplied as one matched package on a single schedule.
- API 610, ISO 5199 and EN 733 scopes, with the applicable standard stated in the quotation.
Service & support
Remote and on-site support available, from installation supervision to commissioning and troubleshooting.
What we need from you to quote
For replacements, send a nameplate photo — we identify the exact unit and quote the original part.
- Flow rate and head, including minimum and maximum duty
- Medium: density, viscosity, temperature and solids content
- Materials, seal type and NPSH available
- Quantity, destination port and required delivery date
Answers before you ask
Frequently asked questions
What do you need to select a pump for me?
We need flow, head, medium, temperature, NPSH available and your power supply. With those five items we can select the pump, confirm the material and seal, and quote.
Do you supply API 610 pumps for refinery service?
Yes. We supply Sulzer API 610 / ISO 13709 process pumps including OHH, ZE / ZF and MSD barrel pumps, with the material and seal plan required for your service.
Can you supply a pump from a brand other than KSB and Sulzer?
Yes. We source most international and Chinese pump brands. Send us the nameplate or duty data and we will quote the original pump.
Do you only supply the eight brands shown on your homepage?
No. We source and supply spare units and parts for most international and Chinese industrial brands, not only the eight brands shown on this site.
I do not know the exact model number. Can you still quote?
Yes. Send us a photo of the nameplate and we will identify the exact unit before preparing the quotation for the original part.
Do you supply genuine original manufacturer parts?
Yes. We supply genuine original manufacturer parts. Send us a photo of the nameplate and we can identify the exact unit before quoting, so you do not need to look up a model number.
Do you provide installation guidance, commissioning and after-sales support?
Yes. We provide installation guidance, commissioning support and after-sales support, remotely or on site depending on your project.
What is the delivery time?
Lead time depends on the product and configuration. We confirm the delivery schedule together with the quotation, so you have a firm date before you order.
Which export documents and certificates can you provide?
We can provide applicable CE and ISO documentation, certificates of origin, packing lists and test reports according to the requirements of your destination country.
What payment terms and incoterms do you work with?
We accept T/T and L/C payment, and quote FOB, CIF or EXW terms to suit your project.
Send us your duty data and we will select it for you
A nameplate photo is enough to start. We identify the unit, confirm the specification and quote the original part.
Request a Quotation